SlimLine Plus PoE Industrial Connectivity
The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use.
Overview
Features
Spec
Order Guide
Overview
-
Fully IEEE 802.3af compliant Power Sourcing Equipment (PSE) operation
-
Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port
-
Model 2 saves you space and money by powering 2 PoE (48 VDC) ports
-
Plug and play saves you time and money
-
Industrial rated for any application
top
Features
-
Power Sourcing Equipment (PSE) operation
-
Auto-detection of PD (powered devices)
-
Supplies up to 15.4 watts per channel
-
Over-temperature and over-current detection
-
Over and under-voltage protection
-
No user settings
-
Ready to use right out of the box
Industrial Tough
-
Truly industrial -40 to 75°C operation (derated)
-
Slim package for DIN-rail or panel mounting
top
Spec
Ethernet Performance
-
Ethernet protocols supported all IEEE 802.3
-
Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out)
-
Ethernet port standards 10/100BaseTX IEEE 802.3/802.3u
-
Fully IEEE 802.3af compliant
-
IEEE 802.3af PoE operation Power Sourcing Equipment (PSE)
-
PoE power output 48 VDC @ 15.4 Watts per channel
-
24V model: Derate 1W per 2°C over 60°C
-
RJ45 PoE pin assignments (A=unused pair; B=signal pair)
-
A: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
-
B: TX/V- (3, 6); RX/V+ (1, 2)
-
-
PoE operation auto-detection and power management
-
PoE disconnect mode AC for 24V-1 and DC for 48V-2
-
PoE protection over-temp, over-current, over/under-voltage and transient
-
Power input fully IEEE 802.3af PoE compliant
-
Power input for 48V-2 models 45-56 VDC @ 31 Watts max.
-
Power input for 24V-1 models 18-30 VDC @ 20 Watts max.
-
PoE transient protection 15,000 watts peak
-
PoE spike protection 5,000 watts (10 times for 10 uS)
-
Operating temperature range -40 to 75°C (cold startup @ -40)
-
24V model: Derate 1W per 2°C over 60°C
-
Storage temperature range -40 to 85°C
-
Humidity (non-condensing) 5 to 95% RH
-
Vibration, shock and freefall IEC68-2-6, -27 and -32
-
Electrical safety UL508/CSA C22.2/14 (CUL); EN61010-1
-
EMC emissions and immunity FCC Part 15 / ICES-003; EN55022/IEC61326-1
-
Hazardous locations UL1604/CSA C22.2/213 (CUL), C1, D2; ATEX/Cenelec Zone 2
-
DIN-rail or direct to panel mounting
-
Packaging material and protection Lexan with IP30 protection
-
Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
-
Weight approximate 0.17 Kg (0.25 lbs)
-
MTBF estimated >1,000,000 hours
top
Order Guide
Part Number | Description |
EB-PSE-24V-1A | PoE injector for 1 PoE port (uses unused pairs), 24V input |
EB-PSE-48V-2A | PoE injector for 2 PoE port (uses unused pairs), 48V input |
EB-PSE-24V-1B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |
EB-PSE-48V-2B | uses signal pairs for PoE, ideal for 4 wire cables (special order) |